M/N 500
S/N 960868
Year 1996
Control Acramatic 2100
Spindle H.P. 10
Spindle Speed 30-8000 RPM
Spindle Tape cat 40
21 ATC
Table size 27.5 x 20.5″
Work load capacity 770 lbs.
X Travel 20″
Y Travel 20″
Z Travel 20″
Full coolant enclosure
Right angle head and vise does not go with machine.

Contact Jack for details.

$5,500

240/480/460
3 Phase
S/N 282820
3′ x 5′, 5′ High
2409 Lbs.

$5,500

Hydro Air Hydraulic Power Unit
Max Pressure 5000 psi
Main Motor 20 HP 1200 RPM
30 gallon JIC Reservoir
Chiomofox Heater AREMT-3305-T2 60-250 degrees
Thermal Transfer Heat Exchanger
Comes with Power Unit Service Instructions
Manufactured in 1999
This unit was never used.  Like new.

$6,250

J-300 Control
Comes with 4 boards
Came from Mataurra 510VG VMC; year 1997
JCP01
JCP028
JCP03
JSV01

this unit still has the Battery in it so it has not lost any info .

$6,500

S/N 260469
48″ Table with milling vise
Chrome ways – R-8 spindle 
2 H.P. 220/440/3 milling head – variable speed
Servo power feed on long table 
Trionics propmax 2 axis digital read out 
One shot lubrication

Inspect under power. 

$7,500

PC Needs repair, will not power on.  

For parts or repair.

$9,500

M/N HV22RS
H.P. 22
Hours 13000

Air Dryer Zek 
M/N 126HSGA100
S/N 277164

$10,500

16MI Fanuc Control 
Year 2000
M/N 2XI
S/M 07377
X Travel 20″, Y Travel 14″, Z Travel 18″
24 ATC 40ct  taper tools   comes with some tooling 
Table size 30 x 14
15 H.P. 15000 RPM
High pressure coolant 
Chip conveyor 
13000 Cutting hours 

Inspect under power.

$12,000

With live tooling LNS S2 Bar feed
5- Axis 
Bar cap 2.75
Max turning 12.19
Max turning length 17.81 
Y-axis, yes trav 2.375Set up for collets 
Main spindle motor 35
Spindle nose A26
Max RPM 4000
Turning diameter 12.19
Sub spindle bar cap 1.625
Sub spindle motor 10 H.P. 
Sub spindle nose A25
Collet size B60
No. of live tooling position- 12
Live tool motor power 5 H.P.
Max live tool RPM 3000
Drill cap 2.5″
Fanuc 181 t
LNS Bar  Feed
Inspect under power.

$28,500

Bar feed BOSS 432/37
No. A03021902
M/N 520 D
Machine Type S20(D)
S/N 3439
Year 1995 
Fanuc Series 0-TC
Live tooling, sub spindle 
Bar feed capacity 1.2598 12′ length 
was not used for high production     Very Good Condition  inspect under power  

$24,000